DIY Appliance Repair Tips

Wait! Before you pick up the phone to hire an appliance repair in Washington DC for assistance, you should be able to keep your appliances running like new with the troubleshooting tips below.

1. Smelly Washing Machine

The presence of a gross odor in a washer defeats the purpose of the appliance! If you’re in the process of trying to get your clothes so that they’re clean and fresh, but your washer won’t cooperate, run an empty cycle in hot water and pour in two cups of white vinegar and a half-cup of baking soda to eliminate the unpleasant smell. This problem frequently occurs in front-loading machines. To eliminate future odors, crack the door open between cycles to let it dry out.

2. Inefficient Refrigerant

A warm refrigerator is not a good sign. A warm refrigerator won’t keep liquids cool, and the food on the inside might also be on the verge of rotting! In most cases, your refrigerator won’t be in need of professional repair; it could just need a cleaning. Or the coils on the back of the appliance are in need of cleaning.

Unplug the refrigerator and move it far from the kitchen wall prior to cleaning the refrigerator coils. If you do not notice immediate cooling improvement, it’s a good idea to reach out to an appliance repair company.

3. Clicking Igniter on Stove

If the igniter on a gas-powered stove clicks and clicks and the burner will not light, look to make certain the burner lid is on tight and properly aligned. You may notice this if you’ve recently had a boil over or liquid spill on your stove top.

If that’s not the case, the reason is most likely to be a dirty igniter. To clean , take off the burner lid and clear off any particles. You can use a pin to scrape debris from the grooves of the igniter. If that doesn’t eliminate the issue, it is wise to not disassemble a lighter for anyone without training; in this case enlist a professional appliance repair company to investigate the problem.

4. Broken Garbage Disposal

A sink’s garbage disposal includes self-protection in the form of an overload trip. If it is clogged, overheats, is left on for too much time, or has a different problem, the disposal might just have to be reset instead of repaired. First, please make sure the switch is turned OFF. Next, find the reset button on the disposal under the sink and then press the button. If the switch won’t stay in, just wait ten minutes and then press it again. Next, turn on the water and turn the button on.

If the disposal in the sink is clogged with waste and you the only thing you hear is a humming sound rather than the grinding of food, you may need to unwind the blades with a hex key tool to eliminate the clog. Next, press the reset button to get the disposal working again. If these tips fail to get things working like it should, don’t succumb to the temptation to push your arms down into the blades to figure things out. Be safe and arrange service with a professional appliance service in Washington.

5. No Power from Outlet

In a home’s bathroom or kitchen, the electrical outlets need to be installed with GFCI capabilities to protect against harm in wet areas. If a GFCI outlet is not providing power, press the red reset button to see if it will restore juice.

If not, or if you’re trying a standard outlet, make certain that a breaker hasn’t tripped in the breaker panel. If you are unsure if a circuit breaker is tripped, switch it to the OFF position and then flip it back to the ON position. Just remember, safety around electrical outlets is critical. If you have doubts, call a professional technician.

6. Wobbling Washing Machine

A shaking washing machine will often produce quite a startling banging and is not a great method to get clean laundry. If yours starts banging, the unit might be broken. To fix this issue, rotate the legs on the appliance to lift or lower each of the corners until it is level. One other possible case is that the unit is not leveled. Crack open the top and rearrange the clothes so that they’re evenly dispersed in the drum of the washer.

Doing this could help your washing machine not have to work quite as hard. If you attempt to rearrange the clothing a couple of times to no avail, do not ignore the issue. You could have a loosened drum or motor mount to fix, which is easy enough for a professional to repair. But continuing to operate your washing machine with this problem might destroy other parts and lead to a bigger repair in the future.

Call for Help

If none of these suggestions are able to fix your broken appliance, it is time to schedule an appointment from DC Appliance Repair ASAP!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts